Cree 5 Watt XPG3 LED P13.5s for RYOBI 18V *** P704 *** - Brilliant 320 Lumen -
Cree 5 Watt XPG3 LED P13.5s for RYOBI 18V *** P704 *** - Brilliant 320 Lumen -
Cree 5 Watt XPG3 LED P13.5s for RYOBI 18V *** P704 *** - Brilliant 320 Lumen -
Cree 5 Watt XPG3 LED P13.5s for RYOBI 18V *** P704 *** - Brilliant 320 Lumen -

Cree 5 Watt XPG3 LED P13.5s for RYOBI 18V *** P704 *** - Brilliant 320 Lumen -

Cree
$14.95
$14.95

Cree 5 Watt XPG3 LED P13.5s for RYOBI 18V *** P704 *** - Brilliant 320 Lumen -

NOTE: This LED IS NOT for Sears Craftsman C3 19.2 V Work Lights. Please See

NOTE: NOT FOR Other Ryobi Tool Lights

Note: Our LED Upgrades are Not FOR Already LED Lights Like RYOBI P705

------ NEW Cree XPG3 UPGRADED FROM our previous Cree XPG2 ******                                              

 Cree® XLamp® XP-G3 LED Delivers More Lumens-Per-Watt                  

Use this 320 LUMEN LED PR Bulb to upgrade standard P13.5S bulb lights 

                        for superior brightness, efficiency, and longevity.

LED UPGRADE For the Following

Rechargeable Work lights and Replacement Bulbs:

Work Light Upgrade For:

Bulbs Upgrade For:

Ryobi

P704

18v

Ryobi

780287001

19.2v

 

 

  Ryobi  is a trademark of Ryobi Limited

 


                        --- Super Bright Leds for Less --- 

Simply replace your existing bulb with this LED – no modifications necessary!

*Please note, the LED bulb will be bright but not as bright as highest power Krypton or Xenon bulb over 10 watts. 

  • Universal Voltage Works with standard flashlights and Work Lights 5.5 Volt to 30 Volts
  • Universal Polarity (+ or -) on bottom contact or Flange!
  • Minimizes battery and bulb replacement waste
  • Focusability of the flashlight is preserved with these point source LEDs
  • Brighter Light for an improved vision for enhanced visibility of fine detail
  • Longer battery life from high efficiency LED
  • Long lamp life 50,000 hours of continuous use
  • Dependable and shock-resistant
  • Easy To Install

    Features:

    INTENSE BRIGHT LIGHT output comes from the ultra-efficient. The LED does not fade when it gets hot, so its light output is stable even after extended run times.

    FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.

    MAXIMUM EFFICIENCY These LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power.

    LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens/watt. These LEDs maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to amber light.

    INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.

    EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary

                                                See the difference!

                                                 

     

    1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.

     

    2) Warning! - For safety always follow manufacturers' safety and operational instructions.  

     

    3) Caution! - Remove batteries, turn off or disconnect power before changing the bulb.

     


    * The perfect bulb (High Brightness and Longer Battery life run time).

    This Cree is a Point source LED (Better were focused light is desired) and the Epistar in other add below is a diffused LED (Wide-angle area Light is desired).

    Description:

    Upgrade / Replacement for standard Work Light applications that take a flange base light bulb for 6.5-30 Volt battery operated products (Zink, Alkaline,  lithium, NiCad).

    *EPISTAR is a trademark of EPISTAR Corporation

    *CREE is a trademark of Cree, Inc.

    * Draco Products is not affiliated with Epistar Corporation or Cree, Inc.

     ☛ ·       Buy two now and save with discounted shipping, why not get two?

    This is a very popular style of bulb for Many Work Lights, and flashlights

    *Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so the purchaser is responsible for compatibility with their actual product.

    The Lamp has a STANDARD 'PR' Base - P13.5s is an International standard flanged base, 9.2mm Diameter, with flange "V" notch

    Draco Products provides quality technology products supporting our 1000's of satisfied customers.

    © 2015-2022 Draco Products. All Rights Reserved