Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights
Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights
Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights
Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights
Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights
Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights

Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights

Regular price
Sale price

Use this better (250 LUMEN) Universal Polarity LED PR Bulb to upgrade standard P13.5S bulb lights 

                        for superior brightness, efficiency, and longevity for Less --- 

We have many satisfied customers with this listing because some tool lights are reversed and can only use universal polarity LED. 

This is a custom LED there aren’t many LED with this universal (+) or (-) capability. 100 lumen price at $13.90

STOP: First Check Your LIGHT and SEE BELOW for Best 220 LUMEN LEDs ---- Most pick the standard polarity below which is a brighter one if their light is compatible.

Note: This LED is not for RYOBI, Sears,  or Milwaukee M12 M18 and V28 which can use the "Standard Polarity" LEDs 

                          See brighter cool running LED for Sears or Milwaukee at:

            No LEDs will work in some older Milwaukee 49-24-0165 V18, and (14-46-1800, 14-46-1825, 49-24-0155)

Simply replace your existing bulb with this LED – no modifications necessary!

*Please note, LED bulb will be bright but not as bright as highest power Krypton or Xenon bulb over 10 watts. 

  • Universal Voltage Works with standard flashlights and Work Lights 6.5 Volt to 30 Volts
  • Universal Polarity (+) or (-) on bottom contact or Flange !
  • Minimizes battery and bulb replacement waste
  • Focusability of flashlight is preserved with these point source LEDs
  • Brighter Light for improved vision for enhanced visibility of fine detail
  • Longer battery life from high efficiency LED
  • Long lamp life 50,000 hours of continuous use
  • Dependable and shock resistant
  • Easy To Install


INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.

FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.

MAXIMUM EFFICIENCY These LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power.

LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.

INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.

EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary

                                   Standard PR Incandescent vs. LED


                                      See the difference!


1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.


2) Warning! - For safety always follow manufactures safety and operational instructions.  


3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb.



* The perfect bulb (High Brightness and Longer Battery life run time).

This Cree is a Point source LED (Better were focused light is desired) and the Epistar in other add below is a diffused LED (Wide angle area Light is desired).

See my other add for more details.   

Draco-Products 5-30 VDC LEDs 

Want the BEST -- LED UPGRADE For the Following?

Rechargeable Work lights and Replacement Bulbs:

If you know your Tool light is Standard Polarity with (+) on bottom of bulb the 5-30VDC LED will be a brighter (220+ Lumen) and cooler running. Click HERE and search Draco Products for your light options.

Upgrade / Replacement for standard Work Light applications that take a flange base light bulb for 6.5-30 Volt battery operated products (Zink, Alkaline,  lithium, NiCad).

* Milwaukee®, M12™, M18™, V28®, are registered trademarks of Milwaukee Electric Tool Corporation

*EPISTAR is a trademark of EPISTAR Corporation

*CREE is a trademark of Cree, Inc.

* Draco Products is not affiliated with Milwaukee Electric Tool Corporation, Epistar Corporation or Cree, Inc.

  ·       Buy two now and save with discounted shipping, the right bulb is hard to find, why not get two?

The LED is either Polarity LED with bottom contact or Flange either Positive or Negative ! 

*Specifications are accurate for this Miniature LED Bulb subject to change. Applications for this standard Flange type bulb are too numerous to list so purchaser is responsible for compatibility with their actual product.The Lamp has a STANDARD 'PR' Base - P13.5s is International standard flanged base, 9.2mm Diameter, with flange "V" notch

 ★  Thank You. Please return a positive review for good service, Thank You.

© 2014-2019 Draco Products. All Rights Reserved