Use this 250 Lumen Universal Polarity LED PR Bulb to upgrade standard P13.5S bulb lights
Value LED Epistar 3 Watt Universal Non-Polarity Bulb FOR Tool Lights (+ or - ) for superior brightness, efficiency, and longevity for Less ---
We also have a twice as bright Cree 5 Watt LED see:
Value LED Cree 5 Watt Universal Non-Polarity (+) or (-) Bulb FOR Tool Lights
Note: This LED is not for RYOBI, Sears, or Milwaukee M12 M18 and V28 which can use the "Standard Polarity" LEDs
See brighter cool running LED for Sears or Milwaukee at: https://stores.ebay.com/Draco-Products
No LEDs will work in some older Milwaukee 49-24-0165 V18, and (14-46-1800, 14-46-1825, 49-24-0155)
We have many satisfied customers with this listing because some tool lights are reversed and can only use universal polarity LED.
This is a custom LED there aren’t many LED with this universal (+) or (-) capability.
Most pick the standard polarity which is a brighter one if their light is compatible
Simply replace your existing bulb with this LED – no modifications necessary!
*Please note, the LED bulb will be bright but not as bright as the highest power Krypton or Xenon bulb over 10 watts.
- Universal Voltage Works with standard flashlights and Work Lights 6.5 Volt to 30 Volts
- Universal Polarity (+) or (-) on bottom contact or Flange!
- Minimizes battery and bulb replacement waste
- Focusability of the flashlight is preserved with these point source LEDs
- Brighter Light for the improved vision for enhanced visibility of fine detail
- Longer battery life from high efficiency LED
- Long lamp life 50,000 hours of continuous use
- Dependable and shock-resistant
- Easy To Install
Features:
INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.
FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.
MAXIMUM EFFICIENCY These LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power.
LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens/watt. These LED to maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to amber light.
INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.
EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary
 |
|
|
1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage. |
|
|
|
|
|
2) Warning! - For safety always follow manufacturers' safety and operational instructions. |
|
|
|
|
|
3) Caution! - Remove batteries, turn off or disconnect power before changing the bulb. |
|
|
|
* The perfect bulb (High Brightness and Longer Battery life run time).
This Cree is a Point source LED (Better were focused light is desired) and the Epistar in other add below is a diffused LED (Wide-angle area Light is desired).
See my other ad for more details.
Draco-Products 5-30 VDC LEDs
Upgrade / Replacement for standard Work Light applications that take a flange base light bulb for 6.5-30 Volt battery operated products (Zink, Alkaline, lithium, NiCad).
* Milwaukee®, M12™, M18™, V28®, are registered trademarks of Milwaukee Electric Tool Corporation
*EPISTAR is a trademark of EPISTAR Corporation
*CREE is a trademark of Cree, Inc.
* Draco Products is not affiliated with Milwaukee Electric Tool Corporation, Epistar Corporation, or Cree, Inc.
☛ · Buy two now and save with discounted shipping, the right bulb is hard to find, why not get two?
This is a very popular style of bulb for Many Work Lights, flashlights, and work lights
The LED is a Univeral all Polarity LED with bottom contact or Flange either Positive or Negative!
*Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so the purchaser is responsible for compatibility with their actual product.
The Lamp has a STANDARD 'PR' Base - P13.5s is an International standard flanged base, 9.2mm Diameter, with flange "V" notch
★ Thank You. Please return a positive review for good service, Thank You.
© 2014-2024 Draco Products. All Rights Reserved