Epistar Value 3W LED Worklight Upgrade 9.6v 12v 18v 6.5-30V Universal Polarity (+or-)
Epistar Value 3W LED Worklight Upgrade 9.6v 12v 18v 6.5-30V Universal Polarity (+or-)
Epistar Value 3W LED Worklight Upgrade 9.6v 12v 18v 6.5-30V Universal Polarity (+or-)
Epistar Value 3W LED Worklight Upgrade 9.6v 12v 18v 6.5-30V Universal Polarity (+or-)
Epistar Value 3W LED Worklight Upgrade 9.6v 12v 18v 6.5-30V Universal Polarity (+or-)

Epistar Value 3W LED Worklight Upgrade 9.6v 12v 18v 6.5-30V Universal Polarity (+or-)

Vendor
Epistar
Regular price
$12.95
Sale price
$12.95

Epistar Value 3W LED Worklight Upgrade 9.6v 12v 18v 6.5-30V Universal Polarity (+or-)

Epistar Value 3W LED WorkLight Upgrade 9.6v, 12v 18v 6.5-30V Universal Polarity(+or-) 

LED LIGHT PR BULB UPGRADE Flashlight Work Light Lamps from 6.5V-36V (Flashlights and Work Lights).

-- THIS LED NOT FOR for 4-Cell lights. Here are some good choices for 6V lights.

Cree Universal Polarity 360 Lumen 5W LED bulb Replacement 4-Cell 6 Volt Lantern (1.5V-9 Volts)

https://www.dracoproducts.net/collections/lanterns

Use this 250 Lumen LED Bulb to upgrade standard P13.5S bulb lights to superior brightness, efficiency, and longevity.

We have many satisfied customers with this listing because many tool lights are reversed and can only use the universal polarity LED. 

This is a custom LED. There aren’t many LED with this universal (+) or (-) capability. Most can use the standard polarity which is a brighter one, 

costs a little more if their light is compatible. 

           NOT FOR RYOBI or Sears Craftsman, Milwaukee light

Note: Not FOR old Milwaukee 49-24-0165 V18, and (14-46-1800, 14-46-1825, 49-24-0155) Series Flashlights

Not for LED lights (M12 12V LED  49-24-0146) or M18 18V LED 2735-20 Lights

For Higher Power 3 Watt and 5 Watt LEDs, our store

                        --- Super Bright Leds for Less --- 

Normally, simply replace your existing bulb with this LED – no modifications necessary!


Note: LEDs do not work with OLD Milwaukee 49-24-0165 V18 Series Tool lights.

Note: A new LED will not fix a broken light that does not work with a regular bulb.

*Please note, the LED bulb will be bright but not as bright as high-power Krypton or Xenon bulb over 8-10 watts. 

  • Universal Voltage Works with standard 6.5 Volt-N-up flashlights and 6.5 to 30 Volt work lights!
  • Universal Polarity Positive (+) or Negative (-) on Bottom contact or flange!
  • Minimizes battery and bulb replacement waste
  • Focusability of the flashlight is preserved with these point source LEDs
  • Brighter Light for an improved vision for enhanced visibility of fine detail
  • Longer battery life from high efficiency LED
  • Long lamp life 50,000 hours of continuous use
  • Dependable and shock-resistant
  • Easy To Install

Features:

INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.

FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.

MAXIMUM EFFICIENCY These LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power.

LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens/watt. These LEDs maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to amber light.

INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.

EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary

 

The Epistar LED is a diffused point source LED (Wide-angle area light is desired) and the Cree is a Point source LED (Better were Focused light is desired)

See my other ad for more details.


                                       Standard PR Incandescent vs. LED

                                            

                                                               

* Milwaukee®, M12™, M18™, V28®, are registered trademarks of Milwaukee Electric Tool Corporation

*EPISTAR is a trademark of EPISTAR Corporation

*CREE is a trademark of Cree, Inc.

* Draco Products is not affiliated with Milwaukee Electric Tool Corporation, Epistar Corporation or Cree, Inc.

 

Description:

 

Upgrade / Replacement for standard flashlight Lamp used in many applications that take a flange base light bulb

6.5 Volt- 30 Volt battery operated products (Zink, Alkaline,  lithium, NiCad).

  ·       Buy two now and save with discounted shippingthe right bulb is hard to find, why not get two

This is a very popular style of bulb for Many Work Lights, flashlights, and work lights

 All Polarity,  Universal Polarity Positive (+) or Negative (-) on Bottom contact or flange!

The Lamp has a STANDARD 'PR' Base - P13.5s is an International standard flanged base, 9.2mm Diameter, with flange "V" notch

 

1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.

 

2) Warning! - For safety always follow manufacturers' safety and operational instructions.  

 

3) Caution! - Remove batteries, turn off or disconnect power before changing the bulb.

 


 © 2015-2022 Draco Products. All Rights Reserved