Fix Toro® Super (Old 51552 - 51592) an NEW Toro® Ultra (51599 - 51621) Carbon Brush Set

 Fix Toro® Super (*Old 51552 - 51592) through NEW Toro® Ultra (51599 - 51621) New Carbon Brush Set

                 Bring your Toro back to life!

Replacing brushes and cleaning the commutator early can prevent damage to motor armature.

Product Application

·       Electric motor brush can be used as a replacement for many power tools with 6mm brush see (Dimensions below)

·       To use; remove old brush, Cut copper wire close to old brush, 'Tin' wire lead end and solder, Seat Brushes as shown, Clean armature as needed, re-assemble, and run blower to seat brushes.

·       This brush is compatible with;

       NOT FOR 7 AMP Toro. For  Toro® 7-Amp leaf blower Toro® model 51586 Toro® 7-amp blower. (SEE link below:)

*NOT FOR Toro "850" model 1990's Toro 850 Blower 51575, 51576, 51577, 51578

(Please see  Toro 850 Super Blower Shredder-Vac 12 Amp Replacement Motor Carbon Brush Set)

          Not for Toro Ultra 51594 Blower 10.5-AMP  - please see

   If Not Sure: PLEASE CHECK YOUR BLOWER BRUSH SIZE FIRST!

Replacement carbon brushes are NOT AVAILABLE from Toro®

·       Fix it yourself, eliminating waste, and unnecessary expenses.

☛ ·       Buy two sets now with discounted shipping, the right size brush is hard to find and you'll have them for next time

Description

·       Carbon motor brushes

·       Most commonly replaced power tool components

·       Replacing brushes early can prevent damage to motor armature

·       Often the cause of a poorly running motor

·       Replacing brushes can fix an intermittent motor

Product Specification

·       Product Name : Carbon Brush

·       Fitness of use : Generic Electric Motor

·       Carbon Brush Size (Approx): 6.2 x 6.3 x 19mm (L*W*H)

·       Copper Wire Length (Approx) : 23mm

·       Material : Carbon Graphite

·       Tinned : Solder

·       Color : As Picture Shown

·       Net Weight : 2g (each)

·       Package Content : 2 x Carbon Brush

Specification:

	1) Warning! - Remove Power, turn off, and disconnect power before changing brushes.
	2) Warning! - For safety, always follow manufactures' safety and operational instructions.

* Please return a positive review for good service, Thank You.

© 2015-2023 Draco Products. All Rights Reserved

Toro® and Vac®  are registered Trademark of The Toro Company. Draco Products is not affiliated with The Toro Company.