Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)
Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)

Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5B)

Toro and others
$9.95
$9.95

Fix Toro Ultra 51574 or 51594 or 51617 Blower 10.5-AMP Motor New Carbon Brush Set (10.5A-10.5D)

Bring your Toro back to life!

Replacing brushes and cleaning the commutator early can prevent damage to the motor armature.

Product Application

  • The electric motor brush can be used as a replacement for many power tools with brushes see (Dimensions below)
  • To use: Remove the old brush, Cut the copper wire close to the old brush, solder the 'Tin' wire lead end, Seat the Brushes as shown, Clean the armature as needed to shiny bright copper, reassemble, and run the blower to the seat brushes.
  • This brush is compatible with 

STOP Note: (Take your blower apart and determine the correct one for your blower type 

 

If you have a 7 Amp leaf blower Toro® model 51586 Toro® 7 amp blower.

https://www.dracoproducts.net/search?q=Toro-7

Replacing brushes and cleaning the commutator early can prevent damage to the motor armature.

 

Product Application

·       Electric motor brush can be used as a replacement for many power tools with 8mm brush see (Dimensions below)

·       To use; remove old brush, Cut copper wire close to old brush, 'Tin' wire lead end and solder, Seat Brushes as shown, Clean armature as needed, re-assemble, and run blower to seat brushes.

·       This brush is compatible with Toro model 51594 10.5 Amp motor

Replacement carbon brushes are NOT AVAILABLE from Toro®

·       Fix it yourself, eliminating waste, and unnecessary expense.

☛ ·       Buy two sets now with discounted shipping, the right size brush is hard to find and you'll have them for next time

Description

·       Carbon motor brushes

·       Most commonly replaced power tool components

·       Replacing brushes early can prevent damage to motor armature

·       Often the cause of a poorly running motor

·       Replacing brushes can fix an intermittent motor

Product Specification

·       Product Name : Carbon Brush

·       Fitness of use : Generic Electric Motor

·       Carbon Brush Size (Approx): per list

·       Copper Wire Length (Approx) : 29mm

·       Material : Carbon Graphite

·       Tinned : Solder

 

 

·       Color : As Picture Shown

·       Net Weight : 2g (each)

·       Package Content : 2 x Carbon Brush

 

1) Warning! - Remove Power, turn off, and disconnect power before changing brushes.

 

2) Warning! - For safety, always follow the manufacturer's safety and operational instructions.

 

* Please return a positive review for good service; thank You.

© 2015-2024 Draco Products. All Rights Reserved

Toro® and Vac®  are registered trademarks of The Toro Company. Draco Products is not affiliated with the Toro Company.