LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent
LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent

LED for Milwaukee M12 Upgrade to Cree 5W XPG3 or Epistar 3W LED Replaces Incandescent

Vendor
Cree, Epistar
Regular price
$10.95
Sale price
$10.95

5 Watt Cree or 3 Watt Epistar LED Upgrade Lamp for Milwaukee® M12™ Work Light

 

Replaces Milwaukee M12*, M18*, V28*, incandescent PR bulbs, the Upgrade to LED bulb delivers over 4X-8X run-time of traditional light bulbs. With a 50,000 hour LED this may be the last bulb you ever put into your light; this solid-state light element will not break from a fall!

NEW 5Watt ITEM Link below! *** Improved Technology, please Consider the 5W 320 Lumen CREE XPG-3 LED Bulb Upgrade Replacement Lamp for: Milwaukee M12 M18 V28 Work Light

          Direct Upgrade Replacement for Milwaukee:

 
             Work Light Bulbs                         Work Lights
                    14.4V - 49-81-0020                      M12 49-24-0145
                    18V - 49-81-0030                        M18 49-24-0171
                    28V - 49-81-0040                        V28 49-24-0185                               
                    LED - 49-81-0090

  

Note: LEDs will NOT work in Milwaukee 49-24-0165 V18 and (Very OLD Milwaukee 14-46-1800, 14-46-1825, 49-24-0155) Series Flashlights

NOTE: The Cree LED we sell is brighter but will not upgrade already LED Milwaukee 49-24-0146 M12 LED Work Light, or  2735-20 M18 LED 18 Volt Tool light

Note: A new LED will not fix a broken tool light that does not work with a regular bulb.

Upgrade LEDs provide improved efficiency, clear quality of beam, much longer battery run time, superior bulb life, and drop proof durability! 

- Select the 5-Watt Cree Spot Beam or 3-Watt Epistar Flood Beam.

- The set of two (One-of-each) is the best-LED value around.

Use the Epistar LED for flood beam task light and keep the Cree in the spare compartment for Spot beam use.

NOTE: The 3W-Epistar, 3W-Cree LEDs, are similar brightness in M12, but not as bright as the original high power Krypton or Xeon bulb used in the M18, and V28 lights. 

Important to know that Incandescent light output decreases @70% from full charge to discharged battery. These LEDs stay the same brightness.

These regulated LEDs provide steady light over the full greatly extended run time.

* Milwaukee®, M12™, M18™, V28®, are registered trademarks of Milwaukee Electric Tool Corporation

* EPISTAR is a trademark of EPISTAR Corporation

* CREE is a trademark of Cree, Inc.

* Draco Products is not affiliated with Milwaukee Electric Tool Corporation, Epistar Corporation or Cree, Inc.

 

 

1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.

 

2) Warning! - For safety always follow manufactures safety and operational instructions.  

 

 

3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb.

 

 


Features

  • Replaces M12, M18, V28, and 12V, 18, and 28V Incandescent
  • 4X-8X Run-Time - Increased efficiency for all work lights
  • 50,000-Hr. LED - This may be the last bulb you ever put into your light
  • Impact Resistant – LED light element does not break when dropped
  • Constant Brightness – Regulated Power to maintain the LED at full brightness
  • Whiter than halogen bulb, to help with visual clarity in a dark space
  • Compatible with most other major power tool work lights
  • Compatible with all Types of Battery Chemistry

Specifications 

Voltage 9.6V - 30V

Includes

  • LED Module
  • Custom Focus ring installed

Note: International buyers are responsible for any Customs Duty or VAT Taxes assessed by their country.

★  FEEDBACK: Please return a positive review for good service, We automatically leave positive feedback for all customers.  Thank You.

We want your repeat business!

© 2014-2023 Draco Products. All Rights Reserved