TEKTITE LPR-2 REPLACEMENT PR BULB LED for 2-cell 3.0V Flashlight MILITARY
TEKTITE LPR-2 REPLACEMENT PR BULB LED for 2-cell 3.0V Flashlight MILITARY
TEKTITE LPR-2 REPLACEMENT PR BULB LED for 2-cell 3.0V Flashlight MILITARY

TEKTITE LPR-2 REPLACEMENT PR BULB LED for 2-cell 3.0V Flashlight MILITARY

Teltite
$18.99
$18.99

TEKTITE LPR-2 UPGRADE PR BULB LED for 2-cell 3.0V Flashlight MILITARY 

Use this (250 LUMEN) Standard Polarity LED PR Bulb to upgrade the P13.5S bulb light

 

                   LED is rated for 2.6v  to 3.1 volts.   

  Replaces Incandescent with Upgrade for LPR-2, PR-2, PR4, PR6, KRP-104, HPR-52, XPR-2 X-2C, LWSA201 & LMSA201

THIS LED is Not for use in Mag-lite with alkaline batteries.  In Maglite some, fresh quality alkaline batteries 2-Cells can deliver a LED surge of 3.3 Volts at 1.3 Amps. 

Please see our other protected or regulated LEDs for Maglite or other lights. 

This is a Brighter, Lower cost, Protected LED will work fine in Maglite and other lights with fresh batteries:

  • 520 Lumen – Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Flashlight 2.7-3.3V Replace old Krypton

https://www.dracoproducts.net/products/cree-led-5w-bulb-for-maglite%C2%AE-2-cell-3v-flashlights-2-7-3-3v-replace-old-krypton

We Recommend our Best Regulated bright DC/DC LEDs for all types of batteries:

This Regulated LEDs that will be bright at lower voltages as batteries discharge or for rechargeable batteries:

  •  5.0W CREE - Bright LED 200+ Lumen Upgrade PR Bulb for 2-Cell Flashlights C D AA

https://www.dracoproducts.net/products/5-0w-cree-led-upgrade-pr-bulb-for-lumilite-flashlights-z-2d-z-2c-z-2aa-1-9v


    • 3.0W- Cree LED 200+ Lumen Upgrade PR Bulb for 2-Cell (1-6) Cell Flashlight 1 - 9V Headlight

      This LED is the TEKTITE LPR-2 REPLACEMENT BULB  LED  bulb UPGRADE

      This LED is 250 Lumen (3.0V) PR Lamp ******************

                           Voltage   Current     Lumens

      2.6V        20 mA       15 L  NiCad, Rechargeable Batteries 
      2.7V       50 mA        37 L
      2.8V       100mA       99 L
      2.9V       200 mA    169 L
      3.0V       265 mA    275 L
      3.1V       400 mA    375 L

      --- Super Bright Led's for Less --- 

      Simply replace your existing bulb with this LED – no modifications necessary!

      • Voltage Works 2.9 Volt to 3.0 Volts  (160 lumens at 2.9V to 250 Lumens at 3.0V)
      • Standard Polarity (+) on bottom contact and (-) on Flange !
      • Minimizes battery and bulb replacement waste
      • Focusability of flashlight is preserved with these point source LEDs
      • Brighter Light for improved vision for enhanced visibility of fine detail
      • Longer battery life from high efficiency LED
      • Long lamp life 50,000 hours of continuous use
      • Dependable and shock resistant
      • Easy To Install

      *Draco Products is not affiliated with Tektite® Tektite Industries, Inc.

      Draco Product is not affiliated with Mag Instrument, Inc., which owns the Maglite® trademark


      Features:

      INTENSE BRIGHT LIGHT 

      FOCUSABILITY 

      MAXIMUM EFFICIENCY 

      LONGER BATTERY LIFE 

      INDESTRUCTIBLE LED 

      EASY TO INSTALL 

                                                   See the difference!

                                                

      * Increased Brightness and Longer Battery life run time.

       

       

      1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.

       

      2) Warning! - For safety always follow manufacturers safety and operational instructions.  

       

       

      3) Caution! - Remove batteries, turn off or disconnect power before changing bulb.

       

       

      .

      Description:

      Upgrade / Replacement for standard flashlight Lamp used in many applications that take a flange base light bulb

      2-cell battery operated products (Energizer Zink, Energizer Alkaline,  PowerGenix NiZi, Energizer AA lithium batteries.

       ☛ ·       Buy two now and Save with discounted shipping, the right bulb is hard to find, why not get two

      ******* This listing is for  LPR-2  250 Lumen LED PR Lamp only ******************

      Also, you maybe interested in:

      * AA Battery D CELL Adapter Holder 1.5V Cell Converts 1, 2, 3 AA to 1 D Size

      This is a very popular style (P13.5S) bulb 

      (will also work if used on 3.0 Volt battery lights)

      *Upgrade your flashlight to perfect bulb


      *Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so the purchaser is responsible for compatibility with their actual product.  

      Thank You.

      The Lamp has a 'PR' Base - P13.5s is an International standard flanged base, 9.2mm Diameter, with flange "V" notch

       ★  FEEDBACK: Please return a positive review for good service, We automatically leave positive feedback for all customers.  Thank You.

      If for any reason you are not satisfied with your purchase, CONTACT US FIRST. Please do not leave negative feedback or open a case without contacting us to give us an opportunity to RESOLVE any issue. 

      We are very accommodating and will be more than happy to fix any problem. We want your repeat business!

      © 2019-2023 Draco Products. All Rights Reserved